SEE OTHER PRODUCTS
MODELLING & MOULDS
RESIN MIXER
The Resin Mixer is a mobile preparation system for resin materials used in sanitary ware mould production. Its three-bucket, two-stage architecture separates preliminary preparation from final mixing, while integrated lifting, adjustable mixing control and wheeled material handling bring the main preparation and transfer operations together in one practical working station.
OUR APPROACH
At a Glance
A mobile three-bucket resin mixing system engineered for controlled preparation and handling of resin mould materials in sanitary ware production.
Why?
Why?
Why?
Why?
Why?
//TECHNICAL DATA
Per Year
Per Year
Three-Bucket, Two-Stage Process Architecture
The system combines two 300 L stainless-steel preliminary buckets with one 500 L stainless-steel final mixing bucket, separating initial material preparation from the final resin mixing stage.
Integrated Bucket Lifting Groups
Dedicated lifting mechanisms position the mobile buckets within the machine structure, supporting controlled movement between preparation, mixing and discharge operations.
Variable-Speed Final Mixing Unit
The final mixing section uses an adjustable-speed drive with a stainless-steel mixing shaft and propeller, together with pneumatic vertical movement for positioning the mixing assembly.
Variable-Speed Final Mixing Unit
Mixing time, mixing speed and bucket lifting functions are managed from a central control interface, with manual operation available for selected movements when required.
Mobile Machine and Bucket Configuration
The main structure and preparation buckets are equipped for wheeled movement, allowing operators to position batches and relocate the resin mixer without a permanently fixed production layout.
Adjustable Stainless-Steel Pouring Interface
A height-adjustable stainless-steel pouring funnel transfers the prepared mixture from the final bucket towards the mould, creating a direct and practical link between mixing and mould filling.
