SEE OTHER PRODUCTS
ROTATING WC CASTING MACHINE
The Rotating WC Casting Machine is a modular low-pressure casting system that uses controlled mould rotation to adapt casting, draining and demoulding positions to different WC geometries. Designed for plaster mould production, it combines independent casting modules, automated slip management and hydraulically assisted greenware handling in a configurable platform for sanitary ware manufacturers.
ROTATING WC CASTING MACHINE
At a Glance
A rotating low-pressure WC casting machine that brings mould positioning, modular production and assisted greenware handling into one configurable plaster-casting platform.
WHY THIS SOLUTION?
Put Every WC in Its Best Position
The mould is not tied to one fixed orientation. Rotation allows casting, draining and demoulding positions to be selected around the geometry and handling needs of the WC being produced.
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
//TECHNICAL DATA
Products per year
Products per year
Encoder-Controlled Rotating Casting Bench
The mould-carrying bench is gearbox driven and rotates to the required process position. Encoder feedback provides controlled angular positioning for casting, draining and demoulding operations rather than relying on a fixed bench orientation.
Independent Module Movement
Casting modules are mechanically and functionally separated so their movements can be controlled independently. UNIMAK documentation specifically notes sequential module movement to avoid unwanted mechanical influence or deformation between modules.
Multi-Directional Mould Adjustment
The mould fastening equipment can be mechanically adjusted vertically, laterally and longitudinally. This gives the engineering team additional freedom when adapting the machine interface to different plaster mould geometries and WC models.
Monitored Slip Level & Automated Flow Control
Slip is supplied through a level-controlled tank monitored by probes, while inlet, outlet and draining valves are managed through the casting control system. Maintaining the slip head during filling and thickness formation provides a controlled basis for each casting sequence.
Hydraulic Greenware Demoulding Table
A mobile hydraulic lifting table is positioned beneath the moulds and raised to the required demoulding height, supporting several green pieces together at module level. On appropriate configurations, the same handling principle can also support intermediate sticking operations.
Configurable Plaster Mould Conditioning
Variable-speed mobile fans can be directed toward upper cores, lower cores, side mould sections and freshly demoulded pieces. Where Spagless plaster moulds are used, automatic timed air circuits can additionally manage dewatering of individual mould sections.
