SEE OTHER PRODUCTS
ECM ONE PLUS HIGH PRESSURE CASTING MACHINE / CELL
The ECM ONE+ High Pressure Casting Machine / Cell is a flexible sanitary ware casting solution for washbasins, sinks and water tanks using two-part resin moulds. Its double-deck architecture, adjustable casting position and automated process control can be combined with robotic demoulding and in-cell handling to deliver compact, consistent and highly automated production.
ECM ONE PLUS HIGH PRESSURE CASTING MACHINE / CELL
At a Glance
A compact, robot-ready high-pressure casting cell for sanitary ware, combining double-deck mould capacity, flexible process control and automated greenware handling.
WHY THIS SOLUTION?
More Production per Square Metre
The double-deck mould concept and compact robotic cell architecture increase production density while reducing the floor space required for high-pressure casting. The developed robotic cell configuration achieved a 25% layout saving.
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
Water Tank
//TECHNICAL DATA
Products per year
Products per year
Double-Deck Mould Architecture
Two vertically arranged mould levels enable simultaneous casting within a compact machine structure, increasing productive mould capacity without proportionally increasing floor-space requirements.
Programmable 0–12° Tilting
The casting position can be adjusted between 0 and 12 degrees during different process stages, providing additional control over mould filling, casting and demoulding requirements for different products.
Automatic Proportional Slip Feeding
Automatic proportional slip feeding is integrated with the machine's hydraulic and process controls to provide controlled high-pressure casting conditions throughout the cycle.
Independent Mould-Station Parameters
Casting parameters can be configured individually for each mould station, enabling different process settings within the same production system and improving flexibility for varying product requirements.
Robot-Integrated Cell Automation
The robotic configuration uses dedicated demoulding tooling, axis position feedback and robot-compatible safety interlocks. In the developed cell, three ECM ONE+ machines and one robot are coordinated through a common automation system, with vertical resting storage and automated transfer to the output station.
Fast Mould Access & Flexible Integration
Rear-side access, T-slot mounting and practical mould clamping simplify installation and removal. The system is also designed to support adaptation of existing moulds, giving manufacturers greater freedom when integrating ECM ONE+ into established production environments.
