SEE OTHER PRODUCTS
ADM WC CASTING MACHINE
The ADM WC Casting Machine is a modular plaster-mould sanitary ware casting line for floor-standing, back-to-wall and wall-hung WCs, as well as bidets. It combines model-dependent cast-on-foot or cast-on-rim operation with automatic casting and on-rim demoulding, independent mould installation and controlled post-cast handling for production with less manual intervention.
ADM WC CASTING MACHINE
At a Glance
A modular plaster-mould WC casting machine with model-specific casting positions, automatic on-rim demoulding and independent multi-part mould handling.
WHY THIS SOLUTION?
One Line for More WC Geometries
Produce back-to-wall, floor-standing and wall-hung WCs—including box rim, rimless and open-rim designs—plus bidets, with casting arrangements selected around the model.
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
WHY THIS SOLUTION?
Back to Wall Water Closet (Box Rim / Rimless / Open Rim)
//TECHNICAL DATA
Products per year
Products per year
Four-Section Modular Casting Control
The casting line is divided into four separately managed sections, enabling model-dependent casting cycles and procedures to be assigned across the machine rather than controlling the entire bench as one process block.
Individual Mould Cartridge Architecture
Each plaster mould is mounted and secured independently through dedicated cartridge hardware. The architecture supports 3-, 4- and 5-part mould configurations, with modular top-part lifting and dedicated fifth-part movement arrangements where required.
Bench Tilting & Automatic 180° Mould Turning
The casting bench can change angle during filling and draining, while the optional mould-turning manipulator rotates individual moulds by 180° for cast-on-rim production and repositions them for the subsequent process steps.
Drive-Profiled Automatic Demoulding Manipulator
The manipulator automatically locates each station, grips and rotates the mould, opens the required mould sections, transfers the piece and returns the closed mould to the bench. Drive-controlled speed, acceleration and deceleration profiles provide smoother movement during handling.
Section-Controlled Slip & Spagless Air Circuit
PLC-controlled slip distribution manages filling, level maintenance and return-slip discharge through automatic valves. For spagless mould operation, dewatering air is controlled by module with programmable timing and dedicated pressure regulation.
Programmable Drying & Multi-Deck Piece Buffer
Bidirectional mobile fans operate with programmable blowing direction and duration. The system can also integrate a closed-circuit curtain mould dryer and multi-deck storage conveyors to extend controlled handling of moulds and freshly demoulded pieces.
